Electro-Voice RE3-RE420 Single Handheld Wireless Mic Set, Band 8M

Full Description

Find your voice

Designed to do your voice justice. The Electro-Voice RE420 Vocal Condenser Microphone is engineered to bring out the best in your performances. With a cardioid polar pattern, the RE420 offers maximum ambient noise rejection. You can expect incredibly clear vocal reproduction with a warm and full low-end. Meaning even your live performances will benefit from studio quality.

Simple set-up

The RE3 receiver gives you true plug-and-play usability. Frequency scan and sync functions cut down on lengthy set-up times. Meaning you're ready to go in an instant. While a radio-link between transmitter and receiver ensures clear audio and reliable performance. Every single time.

823 - 832MHz and 863 - 865MHz wireless bands

The 863 - 865MHz band is license free across most of Europe, ideal for any small scale application such as bands, or public speakers who just need one channel without paying a license fee. For larger organisations or applications where a license may be required for insurance or other monitoring purposes, licenses for the 823 - 832 MHz band are available from local authorities in many countries.

Please see the attached PDFs for further licensing information. In every case this information acts only as a guide. Please contact your local licensing authority if you require a license or further information on licensing in your area.

What's in the box?

• RE420-RC3 Wireless Head with RE420 Capsule
• RE3-HHT Handheld Transmitter
• RE3-RX Diversity Receiver

Features

• Frequency scanning lets you ensure there are free frequencies
• Sync function lets you connect transmitter and receiver in seconds
• Shock mounted capsule greatly reduces handling noise during performance
• Excellent speech intelligibility thanks to the large diaphragm
• Robust construction throughout with metal bodies and dent resistant grille
• Two frequency bands in one system - great if you need a license or license free

Specifications

RE3-RX RE3 receiver

• Frequency oscillation mode: Phase-locked loop (PLL)
• Sync frequency: Ultrasonic 40 kHz
• Diversity: Antenna diversity
• Bandwidth: 36MHz
• Signal/Noise ratio: >100dB(A)
• Total harmonic distortion(Thd): <0.6% at 1kHz
• Receiving sensitivity: -81dBm for -12dB SINAD
• Frequency response:
  • 63Hz 16kHz±2dB (BPT)
  • 51Hz 16kHz±2dB (HHT)
• Antenna type: Detachable ½ wave with BNC connector
• Antenna booster power: DC12 - 15V/100mA
• Function display by: LCD
• Control functions: Power, scan, frequency, group, channel, squelch, TX sensitivity, TX attenuation, TX RF power, TX auto off, TX key lock, TX display info, TX sync configuration, RX output volume, RX output level, RX antenna booster power, RX key lock, RX display contrast, RX display brightness, RX system reset.
• Sync data options: Frequency, group, channel, sensitivity level, attenuation status, RF power, auto off status, key lock status, transmitter display (freq or Gp/Ch)
• Audio frequency output impedance:
  • 240Ω (unbalanced)
  • 1400Ω (balanced)
• Squelch and noise muting: Noise muting and tone code locking
• Output ports: 1 x balanced XLRM jack, 1 x unbalanced ¼” TS (6.3mm) jack
• Power supply: DC12 15V/500mA
• Finish: Black polyurethane paint
• Dimensions: 47 mm x 210 mm x 175 mm
• Net weight: 1.23 kg
• Gross weight: 1.49 kg

RE3-HHT RE3 handheld transmitter

• Frequency oscillation mode: Phase-locked loop (PLL)
• Sync frequency: Ultrasonic
• RF power output: 8M (823-865MHz) 10mW
• Display by: LCD + LED
• Function controls: Power, mute, group, channel, frequency, sensitivity adjustment, RF power, auto off, key lock.
• RF stability: <±10kHz at Fc
• Modulation frequency shift: Wideband FM ±48kHz deviation
• Harmonic radiation: <-50dBc
• Battery: 2 x AA alkaline battery or NiMH rechargeable battery
• Charging contacts: Yes
• Microphone coupling: 1.25'' diameter, 28 UN-2A thread pitch
• Microphone electrical contact: 3-ring/3-pin
• Finish: Black polyurethane paint
• Height: 191mm
• Width at threaded end: 37mm
• Width at control cover: 22mm
• Net weight (without head): 346 g
• Gross weight (without head): 480 g

RE420-RC3 Wireless Head with RE420 Capsule

• Element Type: Self-biased condenser
• Frequency Response: 50 Hz – 20 kHz
• Polar Pattern: Cardioid
• Sensitivity, open circuit voltage @ 1 kHz: 5.6 mV/Pascal (-45 dBV/Pa)
• Clipping (max SPL): 137 dB SPL (1% THD)
• Self Noise: 22 dB SPL "A" weighed (0 dB=20 μPa)
• Dynamic Range: 115 dB
• Signal-to-Noise Ratio: 72 dB
• Output Impedance: 1000 ohms
• Power Requirements: 4-8 VDC phantom power
• Polarity: Positive pressure on diaphragm produces positive voltage at centre contact relative to ground contact
• Electrical Contact: 3-Ring/3-Pin
• Threaded Coupling: 1.25'' diameter, 28 UN-2A thread pitch
• Finish: Black polyurethane paint
• Materials: Aluminium, steel, steel wire grille screen
• Dimensions: 85.3 x 49.6 mm
• Weight: 130 g